|
| Husqvarna CS 2512 |
 |
| The Husqvarna CS 2512, in combination with the hydraulic unit PP 455 E, is a powerful and easy to use wire saw. It can handle very large jobs while, at the same time, being sufficiently compact and mobile to handle smaller jobs. It can be used for a wide range of applications, both on the ground or mounted on walls. On the CS 2512, the drive wheel is located on the output side of the machine so that slack in the wire never occurs in the machine even when the feeding power is low. The adjustable pressure valve provides accurate control of the sawing operation and superior performance. The machine is easy to rig and many cuts can be made directly without external pulley wheels. |
|
|
|
|
|
|
Easy transportation
Practical collapsible handles and foldable guard allow easy transportation of the unit. The saw can also be dismantled into sections, which further increases mobility. |
|
|
|
Turning mechanism
The casters follow the direction of the wire automatically thanks to the ball bearing turning mechanism. |
|
|
|
Vertical position
Wire sawing with saw in vertical position. |
|
|
|
Horizontal position
Wire sawing with saw in horizontal position. |
|
|
|
|
|
|
|
- Patented hydraulic gear with two peripheral speeds.
- The CS 2512 can be set both horizontally and vertically for direct sawing without extra pulleys.
- An alignment scale guide the wire to the correct magazine wheel.
- The pressure reducing block makes it easy to control the sawing process.
- A chock valve at the cylinder reduces the external forces in the machine.
- Warranty: 2 years
|
|
|
|
|
|
| Engine |
|
| Power requirement |
26.8 hp |
| Hydraulic flow |
17 gal/min |
| Hydraulic pressure |
230 bar |
| Wire specs |
|
| Wire speed |
65, 82 fts |
| Magazine capacity |
39 feet |
| Wire storage |
49 ft |
| Dimensions |
|
| Weight |
330 lbs |
| Product size, LxWxH |
44x30x36 inch |
|
|
|
|
|
