|
| Husqvarna FS 6500 |
 |
| The Husqvarna FS 6500 combines the traditional 65 HP gasoline engine with the excellent maneuverability of the narrow frame design. The power-to-weight ratio makes the FS 6500 the ideal saw for utility work. |
|
|
|
|
|
|
Hydrostatic drive system
Innovative hydrostatic drive system with balanced dual motor drive system. No belts, chains or gears to adjust. |
|
|
|
IntelliSeal
The IntelliSeal blade spindle (patent pending) has four sealed radial bearings for strength and durability. Allows for a minimum of 500 hour maintenance intervals and a 1000 hour limited warranty. |
|
|
|
|
|
|
- The Quick Stick™ one-hand control is used for drive, control and raising and lowering the blade.
- Cutting depth indicator shows depth of blade in the cut
- 65 HP Wisconsin V465 gas engine delivers 42 HP at the bladeshaft.
- Blade guard has a single, vertical slip on tab for easy removal and allows right or left side mounting for multiple cutting applications.
- Vertically mounted water tubes with single large opening for superior blade cooling.
- Sealed ball bearing, maintenance-free polyurethane front wheels and quick disconnect rear wheels for easy maintenance.
- Eaton model 10 hydrostatic drive with chain and gear reduction drive system provides infinite speeds from 0 to 200 fpm.
- Positive depth stop prevents saw blade from being lowered past pre-set depth.
- Cutting depth indicator clearly shows depth of blade in the cut and is adjustable for all blade diameters.
- Voltmeter and oil pressure gauges for monitoring engine systems.
- Switch controlled water safety device shuts engine off when water pressure drops to protect the blade.
- Lowering valve adjusts feed rate when lowering blade in cut.
- Single lever for forward/reverse, raise/lower offers reliable and infinite variable ground speed control and allows the blade to be quickly raised and lowered.
- Separate neutral engage lever is mounted on the cowl and allows for quick disengage of transmission for ease in transport.
- Warranty: 2 years
|
|
|
|
|
|
| Engine |
|
| Motor manufacturer |
Wisconsin Gas Engine |
| Motor spec |
V465 |
| Max output |
49 kW / 65 hp |
| Fuel tank volume |
9 gal. |
| Air filter type |
4-stage |
| Cutting equipment |
|
| Blade diameter range, min-max |
14-36 " |
| Diamond blade, max |
35 " |
| Max cutting depth |
15 inch |
| Spindle diameter |
1 " |
| Blade shaft diameter |
1.75 inch |
| Transmission |
|
| Axle front |
1.5 inch |
| Rear axle diameter |
1 inch |
| Travel speed |
Infinite speeds: 0 - 200 FPM |
| Dimensions |
|
| Weight |
1300 lbs |
|
|
|
|
|
