We have a wide selection of tile saws, wet saws, tile cutters, ceramic tile saws, ceramic tile cutters and other tile cutting tools.
Tile Saws Home
HomeNew VendorsPrivacy PolicyCredit ApplicationContact Us
   ph. 1-800-593-6095
  CORE-CUT | FELKER | HUSQVARNA | IMER | MK DIAMOND | NED-KUT | PRO-CUT | QEP | TARGET  
 

husqvarna_logo
    Home   spc   Machines   spc   Tools   spc   Accessories  
spc
 
spc
Power Packs
Flat Saws
Core Drilling
Power Cutters
Masonry Saws
Tile Saws
Surface Preparation Equipment
Husqvarna DM 225
spc
Husqvarna 965173803 DM 225 Core Drill
Handheld drill for making holes in construction materials. The wet drilling machine is suitable for professional operators, plumbers, well drillers, electricians and builders. The drilling motor has an optimum power-to-weight ratio. The machine is specially adapted for drill rig DS 160 C.
spc previous model spc models overview spc next model spc
spc
spc
The handle has an integrated water hose, which together with the electric cable run parallel conveniently from the machine.
Handle with integrated water hose
The handle has an integrated water hose, which together with the electric cable run parallel conveniently from the machine.
To simplify the initial stages of drilling, a button can be pressed immediately after the machine has been started, reducing the speed by half. This feature is extremely useful when making a starter hole.
Smartstartâ„¢
To simplify the initial stages of drilling, a button can be pressed immediately after the machine has been started, reducing the speed by half. This feature is extremely useful when making a starter hole.
The DM 225 sits comfortable against your body due to the soft rear section and a larger contact area.
Soft rear section
The DM 225 sits comfortable against your body due to the soft rear section and a larger contact area.
The DM 225 is equipped with three gears.
Three gears
The DM 225 is equipped with three gears.
spc
OTHER FEATURES
spc
spc
  • 1,725 W power, 10 A, (230 V), 15 A, (110 V).
  • Lightweight, only 12 lbs.
  • 3 speeds, 580/1400/2900 for optimum cutting.
  • Recommended drilling diameter, max 6" on rig.
  • Pivoting handle for comfortable working conditions.
  • Recommended drilling diameter, max 4" handheld.
  • Softstartâ„¢ electronic current limiter ensures a softer start and less load on the network.
  • Smartstartâ„¢ reduces rpm by 50% when starting holes.
  • Elgardâ„¢, electronic motor protection.
  • Easy to service, separate access panels for inspection and replacement of carbon brushes.
  • Warranty: 3 months
spc
TECHNICAL DATA
spc
spc
Engine  
Voltage 230 V
Amperage 8 / 15 A
Power 1850 W
Current phase cycle 50 hz
Phases 1
Output RPM 900 / 2150 / 4500 rpm
Output RPM at full load 580 / 1400 / 2900 rpm
Output RPM 900 / 2150 / 0 / 0 / 0 / 0 rpm
Output RPM at full load 580 / 1400 / 0 / 0 rpm
Rated acceleration < 8.2 feet/s²
Drill bit  
Max drill bit diameter 6 inch
Max drill bit diameter, handheld 3 inch
Max drill bit diameter, concrete 4 inch
Max drill bit diameter, masonry 6 inch
Max drill bit diameter Normal: 6" (handheld: 4" concrete: 0" masonry: 0")
Spindle thread, outer G 1/2"
Dimensions  
Weight 12 lbs
Sound and noise  
Sound pressure 86 dB(A)
Sound level 99 dB(A)
spc
MODEL: DESCRIPTION LIST PRICE: YOUR PRICE: QUANTITY:
965173803 DM225 HANDHELD CORE DRILL(HUS) $1,548.00 $1356.95

Join our mailing list to keep informed of new products and sales!
Enter your email address below, then click the 'Join Now' button:
Enter Email:

Core Cut | Diamond Products | Felker | Husqvarna | IMER | MK Diamond | Ned-Kut | Pro Cut | Q.E.P. | Superior Tile Cutter | Target

Security & Privacy    |    Contact Us at 1-800-593-6095    |    © Copyright 2002-2007 Tile-Saw.com